Bullet R1 / R2 Cooling Fan with Guard

This fan is located at the rear of the cooling box and can be accessed by removing the cooling bowl, cooling filter, and top cover. Pulls ambient air through your fresh batch of coffee and blows it out the back.

Compatible with R1*, R1 v2, and R2 models.

* Earlier R1 roasters came equipped with cooling fans that vary slightly from current designs. The main difference is that earlier fans were made as a single assembly, meaning they had a wire attached  to them that connected directly to the roaster. In contrast, updated cooling fans have an attached wire that connects to a separate cable called the External Cooling Fan Cable, and this cable is what connects to the roaster. If you have an older cooling fan and are purchasing an updated one to replace it, you will also need an External Cooling Fan Cable.