We
stock genuine SwissGold brand filters in every size available. If you
want to strike a balance between a paper filter coffee brew and a presspot, these
permanent filters might be right for you. Coffee brewed with a SwissGold filter
has a heavier body as more oils and particulate matter are suspended in the cup.
Yet they they
produce clean coffee that doesn't have the telltale presspot "mud" at
the bottom of the cup.
- SwissGold help coffee develop its full flavor (because the filter openings
let all of the flavor through and do not trap aromatic oils like paper filters)
- SwissGold guarantees optimum extraction time (because of the precisely
computed filter openings)
- SwissGold guarantees that no other flavors mix with your coffee (because
the filter is inert 23k gold-plated)
Please note: these are well-crafted 23 carat gold-plated inert filters, not
the Melitta-made ones I have heard complaints about. With a good conical burr
grinder or plate grinder, you can produce great coffee, never buy paper filters
again, and make your compost pile a happier place. |

- Allows aromatic compounds and soluble solids in ground
coffee to pass through while trapping undesireable insoluble matter.
-
-
Confused
about what size you need?
See our Dimensions below!
|
Cone
Filters (see below for
dimensions) |
|
|
|
#2 Size Cone KF-2
$17.50 (.35 lb ship wt.)

|
#4 Size Cone KF-4
$27(.35 lb ship wt.)

|
|
| Basket Filters: (see below for
dimensions) |
|
|
|
#6 Basket KF-6 fits
small Mr.Coffee,
Mrs. Tea, small Bunn, etc.:
$17 (.35 lb ship wt.)
 |
#10 Basket KF-10 fits Mr.
Coffee
and other 8-12 cup
$20 (.35 lb ship wt.)
 |
#20 Basket KF-20 fits
BunnOmatic B-8
and A-10 models
$21.50 (.5 lb ship wt.)
Discontinued by Swissgold
|
- SwissGold Filter Dimensions
- These are dimensions rounded to the nearest 1/8 inch, and are give
in inches, decimally (.125 = 1/8 inch). Top diameter means outside diameter
at the open, top side of the filter, bottom diameter means outside diameter
at the bottom of the filter as it sits in the brewer, height means the
measurment of the side of the filter from top to bottom. Swissgold provides
no measurements, these are all taken from my own uncoordinated hands
and a bad metal ruler so allow for a bit of error.
|
|
Filter model and type
|
top diameter
|
height
|
|
KF-2 cone
|
4
|
3.5
|
|
KF-4 cone
|
4.75
|
4
|
|
|
Filter model and type
|
top diameter
|
bottom diameter
|
height
|
|
KF-6 basket
|
3.5
|
2.875
|
2
|
|
KF-10 basket
|
4.375
|
3.675
|
2.375
|
|
KF-20 basket*
|
5.125*
|
3.25
|
3
|
- *this filter flares from about 4.5 inches at 3/4 inch
below the top to 5.125 inches. It is made for the BunnOmatic Discontinued
|